封面图
正文内容
制药企业的计算机化系统因工作环境因素，电脑主板经常会因为使用年限、温度、湿度等影响造成主板故障。因此，更换计算机化系统的电脑主板可能是不可避免的工作。更换电脑主板后的计算机化系统应如何进行计算机化系统验证呢？
Because of the working environment of the computerized system in pharmaceutical enterprises, the computer motherboard often fails due to the influence of service life, temperature, humidity and so on. Therefore, it may be inevitable to replace the computer motherboard of the computerized system. How to verify the computerized system after replacing the computer motherboard?
风险分析
risk analysis
1、应用软件系列号失效风险：有些应用软件的软加密策略是基于主板系列化进行的，更换主板后因系列号不同，可能会导致原系列号失效，而应用软件不能正常使用。
1. Failure risk of application software serial number: the soft encryption strategy of some application software is based on the serialization of the motherboard. After replacing the motherboard, the original serial number may become invalid due to different serial numbers, and the application software cannot be used normally.
2、集成板卡驱动程序失效风险：若是更换同型号主板，此风险基本上不会出现。但若是不同型号主板，更换主板后应一并安装相应板卡的驱动程序，特别是与相关硬件设备进行数据连接的相关端口、卡槽等。
2. Integrated board driver failure risk: if the motherboard of the same model is replaced, this risk will basically not appear. However, if the motherboard is of different models, the driver of the corresponding board should be installed together after replacing the motherboard, especially the relevant ports and card slots for data connection with relevant hardware devices.
从以上风险分析看，更换主板基本上不会影响到应用软件的功能与数据，而只是应用系统能否正常启动、硬件设备能否与电脑正常连接。
From the above risk analysis, the replacement of the motherboard basically will not affect the functions and data of the application software, but only whether the application system can be started normally and whether the hardware equipment can be connected to the computer normally.
验证内容
Verification content
1、应用软件正常启动确认
1. Application software normal startup confirmation
更换主板并升级相关集成板卡驱动程序后，确认相关应用软件能否正常启动。若能正常启动（不存在因许可问题而限制部分功能情况），则可确认更换主板对应用软件启动没有影响。
After replacing the motherboard and upgrading the relevant integrated board driver, confirm whether the relevant application software can start normally. If it can be started normally (there is no restriction of some functions due to licensing problems), it can be confirmed that the replacement of the motherboard has no impact on the startup of the application software.
2、数据连接确认
2. Data connection confirmation
若是更换不同型号主板，需进行硬件设备与电脑数据连接的确证。一般而言，硬件设备启动后，能通过系统自检测试的，基本上可确认数据正常连接。若没有自检功能的，可进行进行相关操作，看应用软件能否正常控制设备，同时可正常输出相关结果。
If you replace different models of motherboards, you need to confirm the data connection between the hardware equipment and the computer. Generally speaking, if the hardware equipment can pass the system self-test after startup, it can basically confirm the normal connection of data. If there is no self-test function, relevant operations can be carried out to see whether the application software can control the equipment normally and output relevant results normally.
一般而言，更换主板后，进行应用启动和数据连接确认即可。
Generally speaking, after replacing the motherboard, you can start the application and confirm the data connection.
以上就是为大家介绍的有关计算机化系统验证公司的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以专业的态度,为您提供服务https://www.fmkgmp.com
The above is a detailed introduction to the computerized system verification company. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service https://www.fmkgmp.com